AMC Highway

AMC Highway


Engine wear protection

The product is specially designed for passenger cars with oil system capacity of 3–10 L. It guarantees maximum antiwear protection for 100,000 km (60,000 miles) of run and provides restoration and repair of the engine and its active protection immediately during operation of your vehicle.


  • Compensates the ongoing wear of the engine
  • Fosters the regenerating properties of previously treated surfaces
  • Equalizes compression in cylinders
  • Increases pressure in the oil system to the nominal values
  • Creates an active system of parts protection against loads and overheating
  • Improves lubricating properties of oil and tribological characteristics of engine assemblies
  • Improves engine capacity and acceleration capability
  • Reduces noise and vibrations
  • Increases the service life span of the engine


Overview of the 3 additive components:



The XADO patented additive restores worn surfaces by forming a metal-ceramic layer at high pressure and temperature points.


Ensures ultra-light sliding between the engine parts and reduces friction losses to an absolute minimum.


Protects the engine from oil film breakage and thus additionally protects against wear.

  • How To Use

    The temperature of the solution should be at least 25 degrees C before use.


    1. Shake the can
    2. Introduce its contents into the oil filler neck of
    3. the engine warmed up to the operating temperature
    4. Start the engine and let it idle for 3–5 minutes

    Then the vehicle can be driven as usual.

    After about 2'000 km the application is completed.

    Reuse is recommended after 100'000 km.

  • Additional Info

    The product is compatible with all engine oil types!

    Atomic Metal Conditioner Highway has been specially developed for engines with a mileage of more than 20'000 km.

    The application is considered completed after about 2'000 km. During this time no oil change may occur.


    1 bottle (225ml) is for 3-10 liters Oil. Oil quantity and additive should not exceed MAX together.